Table of Contents
Advertisement
C.
Product Specifications
Product Specifications
PC system with USB ports
Operating System
Memory
Interface
Data Retention
Suspend Current
Operating Current
LED built-in
Data Read/Write speed
Storage Temperature
Operating Temperature
Relative Humidity under storage
Weight
EMI Compliance
Power Supply
*Drivers required for Windows 98SE
**Performance varies depending on testing environment and flash memory
How to Use Hi-Speed USB Drive
To use Hi-Speed USB Drive, all you need to do is to connect the product to a USB port of
your PC; you don't need to restart your computer, as it automatically detect and identify
this drive (Windows ME, 2000, XP and versions above these support USB-based mass
storage devices). You have to install a driver whenever your operating system is Windows
98.
A. Connecting Hi-Speed USB Drive
After you plugged Hi-Speed USB Drive into your PC, Windows automatically creates a
letter for your drive and indicates that it is a removable drive. Then, you may begin using
the drive just like you use the other drives or floppy disk drive.
IBM PC / AT & Notebook & Sub-Notebook
*Win98SE, Me, 2000, XP
16, 32, 64, 128, 256, 512MB, 1GB, 2GB
USB 2.0 Compliant and USB 1.1 Compatible
Up to 10 Years
<300uA, compliant to USB spec. of <500uA
<40mA
Active LED
Up to 7MB/sec (read)** - Up to 6MB/sec (write)**
-10°C - 70°C
0°C - 60°C
5% - 95%
1 ounce
FCC, CE, MIC
USB bus-powered (2.7V - 3.3V)
L
G
U
S
B
D
r
i
v
e
L
G
U
S
B
D
r
i
v
e
Advertisement
Table of Contents
