AvMap EngiBOX User And Installation Manual page 7

AvMap EngiBOX
Use the screws and metal washer included in the box for standard panel thickness of up to 3mm. For
thicker instrument panels, use longer screws and use the formula to choose the right screw length.
Aircraft instrument panel
3
METAL WASHE R
Panel thickness
M4X08 SCREW
Figure 3
IMPORTANT:
Make sure you respect the screw length formula to avoid damaging the
plastic of the EngiBOX. Use light thread locker to prevent screw loosening with vibration.
Use the cutting template, included in the box, to cut out the panel. (see Figure 4)
Figure 4
User and Installation Manual - 7