AvMap EngiBOX User And Installation Manual page 5

AvMap EngiBOX
Note: Software 1.1.0R does not support serial connection and alarm out.
Compatible Engines
•
2 stroke Air cooled: Rotax 447 UL SCDI, Rotax 503 UL DCDI
•
2 Stroke Liquid cooled: Rotax 582 UL DCDI, Rotax 618 UL DCDI
•
4 Stroke Liquid cooled: Rotax 912 DCDI series, Rotax 912S DCDI series, Rotax 914
DCDI series
EngiBOX displays:
•
Exhaust Gas Temperature (EGT)
•
Revolutions Per Minute (RPM)
•
Manifold Pressure (MAP)
•
Oil Pressure (OIL P)
•
Oil Temperature (OIL T) / Air Temperature (AIR T)
•
Cylinder Head Temperature (CHT) / Coolant Temperature (CT)
•
Hobbs meter
EngiBOX measures the engine parameters to warn you instantly if any measurement
exceeds the engine limits and registers instantly the data on the internal memory.
The registered data can be either exported to the micro SD card provided along with the
product or send to the EngiBOX Web Portal through the EngiBOX mobile app. In this way,
data can be analyzed from home and be shared with the engine service center to receive
instant support.
Further EngiBOX features:
•
Wizard to initialize the engine,
•
Parameters displayed in two alternative views: graphic or numeric,
•
Graph page to analyze the performance per each engine parameter (last 20 minutes),
•
Clock page to show flight time, engine lifetime (Hobbs meter) and time since last
overhaul.
Note: Engine inizialization may not be needed in case unit installation has been already
performed by the engine service center or the aircraft manufacturer.
User and Installation Manual - 5