Connecting A Usb Peripheral Device - cable matters USB-C Multiport Travel Dock User Manual

3.5 Connecting a USB Peripheral Device

Installation Instructions
1) Connect a USB 2.0 or 3.0 device to the Dock (cables sold separately)
2) Connect the Dock PD port to a USB charger for the best performance
3) Connect the Dock to a USB-C port on the computer
4) USB devices should be recognized after downloading any needed drivers
5) Always Safely Remove or Eject the device before unplugging
Troubleshooting Tips
Disconnect all cables, reboot the computer, and reconnect everything
•
USB 2.0 port will not charge a device such as smartphone
•
Test the USB device with a different computer
•
Test the USB device with a different USB cable
•
USB 3.0 devices will be limited to the USB 2.0 data transfer rate
•
Contact support@cablematters.com with the model numbers and
description of your hardware configuration.
USB-C™ Multiport Travel Dock with HDMI and PD
www.cablematters.com
7
USB 2.0 data transfer
rate up to 480 Mbps