Connecting To A Lan Or Router - cable matters USB-C Multiport Travel Dock User Manual

3.3 Connecting to a LAN or Router

Link LED
Green
Installation Instructions
1) Connect an RJ45 Ethernet patch cable to the Dock
2) Connect the patch cable to a LAN or router port
3) Connect the Dock PD port to power for the best performance
4) Connect the Dock to a USB-C port on the computer
5) Check the documentation of your router to configure network access
6) Link and Status LEDs should blink to indicate a live connection
Troubleshooting Tips
Disconnect all cables, reboot the computer, and reconnect everything
•
Check that the Link and Status LEDs are lit
•
Turn off all wireless connections from the computer
•
Update the USB-C drivers from the computer manufacturer
•
Test the patch cable with a different device
•
Gigabit Ethernet speed is NOT supported, only Fast Ethernet speed
•
Check if the Adapter is recognized in Windows
Device Manager
Search
Cable Matters USB-C Multiport Adapter
USB-C™ Multiport Travel Dock with HDMI and PD
Universal Serial Bus devices
> Click on:
www.cablematters.com
5
Status LED
Yellow
>