3.2 Connecting the Multiport Dock to a computer with Power Delivery
The Multiport Dock can be connected to a USB-C charger to
provide power to the Dock or charge a laptop while in use
(with PD equipped computers).
Connect the Dock to a USB-C charger for the best performance
Installation Instructions
1) Test with a fully charged laptop
2) Connect HDMI and Ethernet cables BEFORE connecting the Dock
3) Connect a USB-C charger to the PD port of the Dock
4) Connect the Dock to a USB-C port on the computer
5) Look for the charging indicator on your computer (must have PD support)
Troubleshooting Tips (for charging a laptop)
Check that the blue LED on the Dock is lit
•
USB-C Power Delivery must be supported by your computer for charging
•
USB-C charger and cable must be rated for USB-C PD 2.0/3.0
•
Dock can only charge up to 60 watts (some computers require more)
•
Use the USB-C charger/cable that came with the laptop for the best
•
performance
Important Notes: (when using the PD power port)
Do NOT disconnect power to the Dock while in use or it may interrupt the
•
video, Ethernet, or USB functions
Steps if the connected display or Ethernet function is not working:
1) Unplug the Dock
2) Unplug the Adapter and reboot the computer
3) Reconnect the Adapter and cables to the computer
4) Check the PD connection to the USB-C charger
5) Check that the HDMI and Ethernet cables are securely connected
USB-C™ Multiport Travel Dock with HDMI and PD
www.cablematters.com
4