Pager Disassembly - Detailed; Removing Back Cover; Removing Belt Clip; Removing Back Housing - Motorola MINITOR VI Basic Service Manual

4-2
4.3 Pager Disassembly – Detailed
4.3.1

Removing Back Cover

! !
W A R N I N G

4.3.1.1 Removing Belt Clip

1. Press the belt clip tab away from the back housing.
2. Gently pull the belt clip out.

4.3.1.2 Removing Back Housing

1. Turn the pager off.
2. Unlock the battery latch.
Disassembly/Reassembly Procedures: Pager Disassembly – Detailed
Once the front housing and back cover are disassembled, the IS Intrinsic
Safety Rating is voided. Any warranty or repair work must be done by
a IS approved repair facility. The unit must be resealed during re-
assembly in order for the unit to maintain the IS Intrinsic Safety Rating for
Hazardous Locations.

Figure 4-1. Removing Belt Clip.