If You Want The Good Connection With S-Video - Sceptre X32 User Manual

•
Please reference the set-top box's manual as well, to make sure
the set-top box is configured to output correctly to the TV.
•
Sceptre's X32 LCD HDTV supports SONY's universal remote
code. Please look up SONY's codes in your universal
remote's hand book.

If You Want the Good Connection with S-Video...

1. Make sure the power of X32 LCD HDTV and your set-top box is
turned off.
2. Obtain an S-Video Cable. Connect the S-Video connector to both
your set-top box and Composite 1's S-Video connector port off the
back of your X32 LCD HDTV.
3. Obtain a RCA Audio Cable. Connect the white color connector to
both your set-top box and Composite 1's white connector port off the
back of your X32 LCD HDTV.
4. Connect the red color connector to both your set-top box and
Composite 1's red connector port off the back of your X32 LCD
HDTV.
5. Turn on the X32 LCD HDTV and your set-top box.
6. Use the remote control's source button or the source button on the
right side of the TV to switch to AV1 (S-Video).
SCEPTRE X32 HDTV User Manual
- 32 -
www.SCEPTRE.com