If You Want The Good Connection With S-Video - Sceptre X32 User Manual

If You Want the Good Connection with S-Video...

1. Make sure the power of X32 LCD HDTV and your DVD player is turned
off.
2. Obtain an S-Video Cable. Connect the S-Video connector to both your
DVD player and Composite 1's S-Video connector port off the back of
your X32 LCD HDTV.
3. Obtain a RCA Audio Cable. Connect the white color connector to both
your DVD player and Composite 1's white connector port off the back of
your X32 LCD HDTV.
4. Connect the red color connector to both your DVD player and Composite
1's red connector port off the back of your X32 LCD HDTV.
5. Turn on the X32 LCD HDTV and your DVD player.
6. Use the remote control's source button or the source button on the right
side of the TV to switch to AV1 (S-Video).
Please Note :
•
If Composite 1 is already occupied, please use Composite 2 as
your connection port and switch source to AV2 (S-Video).
•
Make sure the yellow connector in the same group is not
connected. You can only connect either the S-Video port or the
Yellow Video connector port. DO NOT CONNECT BOTH.
•
Please reference the DVD player's manual as well, to make sure
the DVD player is configured to output correctly to the TV.
SCEPTRE X32 HDTV User Manual
- 28 -
www.SCEPTRE.com