If You Want The Good Connection With S-Video - Sceptre X23 User Manual

If You Want the Good Connection with S-Video...

1. Make sure the power of X23 LCD HDTV and your DVD player is turned
off.
2. Obtain an S-Video Cable. Connect the S-Video connector to both your
DVD player and Composite's S-Video connector port off the back of your
X23 LCD HDTV.
3. Obtain a RCA Audio Cable. Connect the white color connector to both
your DVD player and Composite's white connector port off the back of
your X23 LCD HDTV.
4. Connect the red color connector to both your DVD player and
Composite's red connector port off the back of your X23 LCD HDTV.
5. Turn on the X23 LCD HDTV and your DVD player.
6. Use the remote control's source button or the source button on the right
side of the TV to switch to AV1 (S-Video).
Please Note :
•
Make sure the yellow connector in the same group is not
connected. You can only connect either the S-Video port or the
Yellow Video connector port. DO NOT CONNECT BOTH.
•
Please reference the DVD player's manual as well, to make sure
the DVD player is configured to output correctly to the TV.
SCEPTRE X23 HDTV User Manual
- 31 -
www.SCEPTRE.com