Dontek Aquasun 3 Instruction Manual

Download this manual

Instruction Manual

DESCRIPTION

The Aquasun 3 is a premium automatic solar controller with temperature adjustment,

manual, winter and tropical mode features. All configurable items are retained after a

power outage for up to 14 days.

Aquasun 3 Instruction_rAD.docx

Need help?

Do you have a question about the Aquasun 3 and is the answer not in the manual?

Page 1 Instruction Manual DESCRIPTION The Aquasun 3 is a premium automatic solar controller with temperature adjustment, manual, winter and tropical mode features. All configurable items are retained after a power outage for up to 14 days. Aquasun 3 Instruction_rAD.docx...
Page 2: Installation Instructions
14.5mm hole be drilled in the PVC pipe, this conduit ends must must must must be sealed to prevent water can be carried out using a Dontek PD01 ingress. Any excess cable excess cable should should...
Page 3 RUN and 4°C for END. If you select OFF then the controller will not The next item is anti-freeze, you will be work as a time-clock model and will prevent prompted by FRZ? ON/OFF, adjust with the Aquasun 3 Instruction_rAD.docx...
Page 4 10 Amps / 2400 Watts, or or or or, on and that the controller must remain 15 Amps / 3600 Watts. Please refer to the turned on at all times. unit’s rating label. Aquasun 3 Instruction_rAD.docx...
Page 5 NOTES Aquasun 3 Instruction_rAD.docx...
Page 6 NOTES Aquasun 3 Instruction_rAD.docx...
Page 7 WARRANTY – AQUASUN 3 This range of product is covered by a limited 3 year warranty against component failure or faulty workmanship from the date of installation. A faulty unit should be returned in the first instance to the dealer from which the unit was purchased.
Page 8 Dontek Electronics Pty Ltd PO Box 239, Bayswater VIC 3153 Australia Phone: +613 9762 8800 Fax: +613 9762 8874 Email: sales@dontek.com.au Aquasun 3 Instruction_rAD.docx...