G3D T-1000 Quick Start Manual page 3

UNBOXING AND SETTING UP THE T-1000
REMOVE THE ACCESSORY FOAM SUPPORT
7
LIFT THE T-1000 BOX
8
Remove the plastic cover of the T-1000.
LIFT THE T-1000 UV 3D PRINTER
9
Printer can be heavy for one person. 2 person lift is
recommended. Move up the lifting handles of the
printer to separate the printer from the bottom foam
support. Place the printer on a flat ground.
REMOVE BUILD PLATE LOCK SCREW
10
INSERT THE BUILD PLATE
11
LOCK BUILD PLATE LOCK SCREW
12
Insert and lock the build plate lock screw.