Table of Contents
Advertisement
Quick Links
Package Contains
1. TT2400 802.11g PCBA (1)
2. IEEE 802.11g miniPCI radio card (1)
3. Power over Ethernet Injector (1)
4. 48VDC Power Adapter (1)
5. Ethernet Cable (2)
6. Waterproof RJ-45 Connector (1)
7. Mounting Hardware (1)
8. 6dBi Sector antenna,
9. 50cm RF cable (cable loss: 8dB)
10. User Manual
Quick Installation
Always double check for any missing parts from the kit you received before deployment.
Next step is to set up the computer Ethernet interface for configuring the TT2400. Since the default IP Address of the
unit is on the 192.168.10.x IP range in both Client Bridge and AP mode you'll need to set the computer Ethernet
interface within the same IP range, such as 192.168.10.66.
Hardware Installation
Follow the procedure below to install your TT2400 device:
1.
Select a suitable place on the network to install the TT2400. For best wireless reception and performance the
external antenna should be positioned within Line of Sight from the AP with proper alignment.
2.
Connect the TT2400 to the ODU side of the PoE Injector via a straight Ethernet cable (Cat-5), and then connect
the NET side of the PoE Injector to either a computer or an Ethernet Switch.
Note: The TT2400 now fully supports the MDI/MDI-X standard and no longer require the use of cross over cable to
connect directly with a computer.
3.
Connect the 48VDC power adapter to the power jack on the PoE injector to power on the TT2400.
Check the LEDs on the TT2400 to confirm if the status is okay. At this point the PWR and LAN LEDs should be on
green. The WLAN light should light up once the unit is associated wirelessly with another wireless device. However at
this point the unit is still in factory default setting so do not the alarmed that the WLAN light doesn't light up.
Web Control Interface
Default IP Address in Client Bridge Mode: 192.168.10.241
Default IP Address in Access Point Mode: 192.168.10.240
Default Login / Password: Nothing needs to be typed in for login and password authentication.
TT2400
Quick User Guide
802.11 g 223 mW
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Teletronics International TT 2400
Summary of Contents for Teletronics International TT 2400
- Page 1 TT2400 Quick User Guide 802.11 g 223 mW Package Contains 1. TT2400 802.11g PCBA (1) 2. IEEE 802.11g miniPCI radio card (1) 3. Power over Ethernet Injector (1) 4. 48VDC Power Adapter (1) 5. Ethernet Cable (2) 6. Waterproof RJ-45 Connector (1) 7.
- Page 2 Teletronics International, Inc. employee or authorized service facility, or any use in violation of instructions furnished by Teletronics International, Inc.
- Page 3 RMA Policy Product Return Policy It is important to us that all Teletronics’ products are bought with full confidence. If you are not 100% satisfied with any product purchased from Teletronics you may receive a prompt replacement or refund, subject to the terms and conditions outlined below.
Need help?
Do you have a question about the TT 2400 and is the answer not in the manual?
Questions and answers