Sceptre LCD Monitor X9S-NagaV User Manual page 14

Monitor Adjustment
Allow you to adjust the LCD monitor's display settings. Press the
Adjustment control button to display the submenu. Use the Function
Select button to select one of the following submenu options:
Auto Adjustment ( For VGA port only, DVI port can't adjustment )
Press the Adjustment control button to let the monitor
determine and select the setting that is most appropriate for
your system requirements.
H-POSITION: ( For VGA port only, DVI port can't adjustment )
To move the LCD monitor's display left or right on a
horizontal plane.
V- POSITION: ( For VGA port only, DVI port can't adjustment )
To move the LCD monitor's display up or down on a vertical
plane.
PHASE: ( For VGA port only, DVI port can't adjustment )
To adjust the focus and clarity of the display
CLOCK: ( For VGA port only, DVI port can't adjustment )
To adjust the display pixel alignmen
RESET:
To reset the entire Monitor-Control submenu settings to
the factory default.
GRAPHIC/TEXT:
Press the adjustment control button to switch between
t.
10 Rev.1