Table of Contents
Advertisement
2 Installation
2.1 Installation Steps
Before beginning installation: If you are not yet an Uplink dealer, register by visiting www.uplink.com
and click on the new dealer account tab.
1. Activate the system. The Uplink 5500EZ operates "out of the box" with most
commercial panels. No additional programming or equipment is required. To
activate with default functions, go to www.uplink.com, or use the Uplink
Installer App, or call 1-888-987- 5465. Consult the Quick Installation Guide
included with the 5500EZ.
2. Install the antenna on the top of the unit.
3. Position the unit for maximum signal strength. Connect the unit to a 12V DC,
500mA power supply. Be sure the area is dry and free from interference of
metal objects and obstructions.
4. Determine network availability and signal strength.
a. Signal strength should be one blink minimum. Relocate the unit or install
a high- gain antenna if necessary.
4 1 3 4 6 4 7
Table 1 - LED Indications – Inside Product Label
R e v 2
Se pt e m be r 1 2 , 2 0 1 8
1 1
Advertisement
Table of Contents
