Table of Contents
Advertisement
1 Overview
The Uplink® 5500EZ is an "always on," multi-purpose, FCC-certified device capable of sending and
receiving alarm signals or other data over the LTE Cellular Network. When connected to an alarm
system, the 5500EZ will send alarm signals over the cellular network to Uplink's alarm processing
center, that will forward the signals to the appropriate monitoring station and/or selected email
addresses.
The 5500EZ can be connected to an alarm system using up to four inputs on the 5500EZ. Each of
these inputs can be set up to send a selected signal to the monitoring station. Contact ID, SIA, Modem
IIe/IIIa2 and 4/2 (:20 PPS) formats are supported.
The 5500EZ also has two configurable relay outputs to send signals to alarm panels or control other
devices.
4 1 3 4 6 4 7
R e v 2
Se pt e m be r 1 2 , 2 0 1 8
1 0
Advertisement
Table of Contents
