Table of Contents
Advertisement
2.8.2
Internal connectors
1.
Serial ATA connectors (7-pin SATA1-4)
These connectors, controlled by AMD integrated SATA controller, are for the Serial
ATA signal cables for Serial ATA drives (SATA 1 connector is used for the optical drive
by default).
The actual data transfer rate depends on the speed of Serial ATA hard disks installed.
2.
Power Supply SMBus connector (5-pin PSUSMB1)
This connector allows you to connect SMBus (System Management Bus) to the PSU
(power supply unit) to read PSU information. Devices communicate with an SMBus
host and/or other SMBus devices using the SMBus interface.
This connector functions only when you enable ASUS ASMB9.
KNPA-U16
2-23
Advertisement
Table of Contents
