Using Your Tv; Status Indicator - JVC LT-40MAT588 User Manual

Using your TV

This section provides information on using the day-to-day features of your TV.

Status indicator

Your TV has a single status indicator. It goes on and off and blinks in different ways
depending on the status of the TV, as shown in the following table:
TV CONDITION
On (screen is active)
Screensaver (screen is active)
Off (no power)
Off (standby)
Starting up from off state
On (receiving update from
USB)
Remote command received
Network connection lost
Powering down to standby
mode
STATUS INDICATOR
Off
Off
Off
On
Slow pulsing blink until
startup completes
Slow pulsing blink until
update completes
Dims on/off once
Two short blinks, pause,
repeat
Slow pulsing blink until the TV
reaches standby.
53
MEANING
Screen is communicating that TV is on.
Screen is communicating that TV is on.
TV is not connected to power.
TV is connected to power and is ready
to use.
TV is doing something.
TV is doing something.
TV has received your command.
TV was connected and paired with a
Roku account and now has no network
connection.
TV is doing something.