Setting Up A Digital Audio Connection - JVC LT-40MAT588 User Manual

Setting up a digital audio connection

amplifier, receiver, or sound bar by using either of these two digital audio
connections:
•
HDMI ARC
output digital audio on one of its HDMI
amplifier can also function simultaneously as an input source to the TV,
if needed. To use the ARC capability, you must connect an HDMI
You also must:
o Be sure your HDMI
o Enable HDMI ARC under Settings > System > Control other devices
(CEC), as explained in
•
SPDIF optical
signal. To use the optical output, connect a TOSLINK optical cable
from the amplifier to the Optical or SPDIF connector on the TV.
Note:
through the SPDIF optical output. This format is only available through the
HDMI ® ARC connection.
After making the required HDMI
Audio > S/PDIF and ARC option and select the audio format to use.
In most cases, Auto detect is the best option. Other settings can result in no
Note:
sound when the content you are viewing does not contain the audio stream type you
selected.
®
The HDMI Audio Return Channel enables the TV to
s HDMI ® ARC connector to the HDMI ARC connector on the TV.
® cable is certified by HDMI
Enable HDMI
The SPDIF optical connector outputs a digital audio
Dolby Digital Plus format is not available
® ARC or SPDIF optical connection, go to Settings >
connect it to an external
®
connectors. The connected
® .
®
ARC.
130
®
cable from