Panasonic SC-HC49EG Service Manual page 44

Step 2 : Lift up the Mecha Chassis & remove Floating Springs.
Caution : Keep the Floating Springs and place them back
during assembling.
Step 3 : Remove 2 screws.
Step 4 : Desolder points on the CD Interface P.C.B..
Step 5 : Lift up the Connector Cover.
Caution : Do not use strong force as it may damage the
connector cover.
Step 6 : Detach 24P FFC at connector (CN7003) on the CD
Interface P.C.B..
Step 7 : Attach short pin to the 24P FFC of the Traverse Unit.
Step 8 : Remove CD Interface P.C.B..
44