Panasonic SC-HC49EG Service Manual page 34

8.15.2. Disassembly of Gear C
• Refer to "Disassembly of Belt, Pulley Gear, Gear B & Gear
A"
Step 1 : Remove Gear C.
8.15.3. Disassembly of Motor Assembly
• Refer to "Refer to (Step 1) of item 8.15.1."
Step 1 : Desolder pins on the solder side of the Motor P.C.B..
Step 2 : Release 2P wire from the slot.
Step 3 : Release catches.
Step 4 : Remove Motor Assembly.
Caution : During assembling, position & align the Motor
wire with the guide on the Gear Base, A "click" sound
is heard when the Motor is fully catched.
34