Advertisement
HDMI EXTENDER
III. Operation
1. Power switch
Pressing the power switch
can switch on or off the power to the transmitter or receiver and enable it to
transmit the signal or close.
Hints：
To ensure that the product can be used normally, the product should be connected when power off in case the
product be damaged. Switch on when finish connection and never plug in or out at will. Please turn off the
product if long time not use it.
2. 5.2GHz channel selection
In order to prevent mutual interference between devices on the same frequency, this product supports setting
the working frequency band, transmission channel, and device name SSID (customizable name SSID) of the
product through the device background WEB. In order to ensure that the content you are viewing is securely
transmitted on the device, please log in to the WEB setting interface through your mobile phone or laptop
before the first use, and change the name SSID and password. The specific steps are as follows:
A. Connect the power adapter to power the transmitter and receiver and turn on the switch.
7
HDMI EXTENDER
B. Open the WIFI WLAN for configuring the phone/computer, search for the name SSID: HDMI Extender
WIFI network, the default password: 12345678.
Note: The factory default configuration is 5G WIFI signal, if the device cannot be found: HDMI Extender WIFI
network, please configure it with a smart phone firstly and change
C. Open the browser, enter the IP address: 192.168.1.8 and then click the Enter button to display the
following interface.
Login
Modify
8
Hide quick links:
Advertisement
