pakite PAT-580 User Manual page 10

HDMI EXTENDER
D. Enter the default login password: admin, click [Login] to enter the configuration interface, if you need to
modify the login password, please click [Modify]. After modifying the relevant parameters, click [save] to save
and exit, and click [reset] to restore the factory settings.
5.2G
Select transmission frequency
Modify product name
Change login password
Select frequency channel
Wireless Band:
Channel:
Name(SSID):
HDMI Extender
PSK Password: 12345678
save reset
Wireless Band: 5.2G
Channel:
Name(SSID):
PAKITE-AV-Sender
PSK Password:
reset
save
9
HDMI EXTENDER
After changing the product name and password, or if the REST product needs to be powered off and
restarted, the WIFI network name of the product can be found.
E. If you accidentally forget the login password, you can also restore the factory settings through hardware
operation. The method of operation is as follows:
Under power-on status, press the REST button on the back of the transmitter and receiver to reset. After
pressing the reset button, the black screen on the TV screen indicates a successful factory reset.
NOTE
Both the transmitter and receiver can
be reconnected after a hardware
reset at the same time.
10