150 meter 2.4ghz dvd stb remote room to room wireless tv to tv av sender & ir remote extender (7 pages)
Summary of Contents for pakite PAT-580
Page 1
Wireless HDMI Extender Wireless IR Remote Extender G Dual-Band Series Waste electrical products should not be disposed of household wants. Please put them to the recyle User Manual facilities. Check with your local authority or VEN1 retailer for recycling advice!
Page 2
HDMI EXTENDER HDMI EXTENDER This product is applicable to the product model: PAT-580 / PAT-583 / PAT-585 / PAT-587 / PAT-590 / PAT-593 / PAT-595 / PAT-597 Notes on Safety Operations Equipment working frequency band: 802.11n40: 5150MHz ~ 5250MHz Do not disassemble...
Page 3
HDMI EXTENDER HDMI EXTENDER This device is restricted to indoor use where operated in the USA using frequency in 5150MHz ~ 5250MHz Labelling requirements: Information to the user: This device complies with part 15 of the FCC Rules. Operation is subject to the Note: This equipment has been tested and found to comply with the limits for a Class following two conditions: (1) This device may not cause harmful interference, and B digital device, pursuant to part 15 of the FCC Rules.
HDMI EXTENDER HDMI EXTENDER Support IR Remote controller to long range extend, can remote control signal source equipment at I. Product Description the receiver. Thanks for buying our products along with the global users. The Wireless HDMI Extender is a kind of wireless Pure hardware mode, plug then use, connect the computer without installing the driver.
HDMI EXTENDER HDMI EXTENDER 4. Receiver installation 3. Transmitter installation Put the transmitter near to STB and other signal source device, connecting the STB HDMI output with the Put the receiver near to TV set which needs to be watched, connect the TV HDMI input with the receiver transmitter HDMI input, then connecting the transmitter HDMI output with the television HDMI input.
HDMI EXTENDER HDMI EXTENDER B. Open the WIFI WLAN for configuring the phone/computer, search for the name SSID: HDMI Extender III. Operation WIFI network, the default password: 12345678. 1. Power switch Note: The factory default configuration is 5G WIFI signal, if the device cannot be found: HDMI Extender WIFI network, please configure it with a smart phone firstly and change Pressing the power switch can switch on or off the power to the transmitter or receiver and enable it to...
Page 10
HDMI Extender Change login password PSK Password: 12345678 save reset NOTE Wireless Band: 5.2G Both the transmitter and receiver can Select frequency channel Channel: be reconnected after a hardware reset at the same time. Name(SSID): PAKITE-AV-Sender PSK Password: reset save...
HDMI EXTENDER HDMI EXTENDER 4. Transmission distance close IV. Common problems and troubleshooting A. Inadequate transmission signal, adjust the angle of the antenna or shorten the distance of devices. B. Adjust the placement and height of transmitter and receiver to enhance wireless signal transmission. Before powering on, you should carefully check whether the cable is normal and must ensure that all interfaces are connected correctly.
HDMI EXTENDER HDMI EXTENDER 7. IR wireless return function is insensitive 1. Warranty is only available to customers who buy this product through legal approach. A. Adjust the placement and height of the transmitter and receiver to enhance wireless signal transmission. 2.