Section 4 - Operating Instructions; Controls And Instrument Identification - Scag Power Equipment 70001, 79999 Operator's Manual

CAUTION:
Do not attempt to operate this mower unless you
have read this manual. Learn the location and
purpose of all controls and instruments before you
operate this mower.
4.1 CONTROLS AND INSTRUMENT
IDENTIFICATION
Before operating the mower, familiarize yourself with all
mower and engine controls. Knowing the location,
function and operation of these controls is important for
safe and efficient operation of the mower.
Left Steering Control
Voltmeter
Mower Deck Switch
Ignition Switch
Hourmeter
OPERATING INSTRUCTIONS
EngineThrottle
Control
Engine
Choke
Control
Fuses
Fuel Gauge
Figure 4-1 Controls and Instruments
1. Ignition Switch (Figure 4-1). The ignition switch is
used to start the engine and has three positions; OFF,
ON, and START.
2. Mower Deck Switch (Figure 4-1). Used to engage
and disengage the mower drive system. Pulling the
switch lever up and then pushing the switch lever
forward will engage the deck drive. Pulling the
switch lever back will disengage the deck drive.
3. Engine Choke Control (Figure 4-1). Used to start a
cold engine.
4. Engine Throttle Control (Figure 4-1). Used to
control the engine speed. Pushing the lever forward
increases engine speed. Pulling the lever back
decreases engine speed. Full back position is the
IDLE position. Full forward is the cutting position.
8
Section 4
Right Steering Control
Parking Brake Control
Speed Control
CAUTION
KEEP BYSTANDERS AWAY
CAUTION
BEFORE OPERATING
READ OPERATORS
MANUAL AND SAFETY
INSTRUCTIONS