Changing The Fuse; Additional Maps - Garmin nuvi 700 series Owner's Manual

a
PPendix

Changing the Fuse

CAUTION: When replacing the
fuse, do not lose any of the small
pieces and make sure they are put
back in the proper place.
If your unit will not charge in your
vehicle, you may need to replace the fuse
located at the tip of the vehicle adapter.
1. Unscrew the black, round end
piece, and remove it.
2. Remove the fuse (glass and silver
cylinder), and replace with a 3A
fast blow fuse.
3. Ensure that the
silver tip is placed
in the black end
piece. Screw on
the black end
piece.


Additional Maps

You can purchase additional MapSource
map data from Garmin and load the
maps on your nüvi's internal memory
or on an optional SD card. Also, check
www.garmin.com/unlock/update.jsp
see if an update for your map software is
available.
To find out the version of the maps that
are loaded on your nüvi, open the Menu
page. Touch
Map Info. To enable additional maps,
you need your unit ID (see
serial number (located near the power
end end
piece piece
connector).
silver tip silver tip
To load maps or waypoints to your nüvi
fuse fuse
memory or SD card, select the name for
your nüvi drive or SD card drive. Refer
to the MapSource Help file for more
information.
Tools Settings
> >
page
nüvi 700 Series Owner's Manual
to
Map
>
35) and