Selecting The Line Type - Savin Fax Option Type 1027 Facsimile Reference Manual

RusC2FaxADEN-F_V4_FM.book Page 188 Monday, August 20, 2001 10:52 AM
Appendix
❖ ❖ ❖ ❖ Adjusting the handset bell volume
Adjust the handset ringer volume using the volume switch.

Selecting the Line Type

Select the Line type to which the machine is connected. There are two types: tone
and pulse dial.
Select the Line Type using "PSTN Line Type" in "Key Operator Settings". The de-
fault settings is "Tone". ⇒ p.172 "Selecting Dial/Push Phone"
Multi-port
When the optional ISDN Unit or optional Extra G3 Interface Unit is installed,
communications can take place simultaneously through multiple lines.
Option
Without option
Extra G3 Interface Unit
ISDN Unit
Extra G3 Interface Unit+IS-
DN Unit
11
Note
❒ A maximum of three communications can take place simultaneously.
❒ You cannot perform three Immediate Transmissions simultaneously.
❒ If three fax messages are received simultaneously, they cannot be printed out
at the same time.
❒ If three communications are in progress, the display shows the first commu-
188 nication that was initiated.
Ringer
ND1X00E1
Available Line Types
PSTN
PSTN+PSTN
PSTN+ISDN
ISDN
PSTN+PSTN+ISDN
PSTN+ISDN
Available Protocol Combinations
G3
G3+G3
G3+G4
or
G3 (ISDN)+G4
G3 (ISDN)+G4
G3+G3+G4
or
G3+G3(ISDN)+G4
G3+G3(ISDN)+G4
or
G3 (ISDN)+G3(ISDN)