Programming Isdn G4 Line - Savin Fax Option Type 1027 Facsimile Reference Manual

RusC2FaxADEN-F_V4_FM.book Page 174 Monday, August 20, 2001 10:52 AM
Key Operator Setting
E E E E
Select an item you want to pro-
gram.
Programming Own Number 1
and Own Number 2
A A A A Select [Own Number 1] or [Own
Number 2]
B B B B Enter
your
number with the number keys.
8
C C C C Press [OK].
Programming a Sub-address
A A A A Select [Sub-address].
B B B B Enter a sub-address with the
number keys.
C C C C Press [OK].
174
F F F F
G G G G

Programming ISDN G4 Line

Optional ISDN Unit is required.
This function must be set when you
connect the machine to an ISDN G4
digital line.
You can program the following items.
• Own Fax Number 1
• Own Fax Number 2
• Sub-address ⇒ p.50 "Sub-address"
own facsimile
❒ Program the Own Fax Number 1
❒ You should program the Own Fax
❒ ISDN allows two or more termi-
❒ Up to four digits (0 to 9999) are
Press [Exit].
Press the { { { { User Tools/Counter} } } } key.
The initial display is shown.
Note
as your own digital number. Pro-
gram Own Fax Number 2 as anoth-
er digital number which occupies a
single line.
Number 1.
nals (such as a fax machine and
digital telephone) to be connected
to a single line. These terminals are
identified by their sub-address
numbers. If the terminals connect-
ed to the line at a destination are
assigned sub-addresses, dialing a
sub-address allows you to direct
your fax message to a particular
terminal at the destination.
available for a sub-address