Savin 3699 Operating Instructions Manual page 2

Introduction
This manual contains detailed instructions on the operation and maintenance of this machine. To get
maximum versatility from this machine all operators should carefully read and follow the instructions in
this manual. Please keep this manual in a handy place near the machine.
Please read the Safety Information before using this machine. It contains important information related
to USER SAFETY and PREVENTING EQUIPMENT PROBLEMS.
Notes:
Some illustrations might be slightly different from your machine.
Certain options might not be available in some countries. For details, please contact your local dealer.
Laser Safety:
CDRH Regulations
This equipment complies with requirements of 21 CFR subchapter J for class 1 laser products. This
equipment contains a 5 milliwatt,765-805 nanometer wavelength, GaAlAs laser diode. This equipment
does not emit hazardous light, since the beam is totally enclosed during customer all modes of oper-
ation and maintenance.
Caution:
Use of controls or adjustments or performance of procedures other than those specified in this manual
may result in hazardous laser radiation exposure.
Notes:
Two kinds of size notation are employed in this manual. With this machine refer to the inch version.
For good copy quality, Savin recommends that you use genuine toner.
Savin shall not be responsible for any damage or expense that might result from the use of parts other
than genuine parts in your Savin office product.
Power Source:
AC115V, 60Hz
Please be sure to connect the power cord to a power source as above. For details about the power
source.