Table of Contents
Advertisement
Operation
3.3.5.2.1
Utility Interface Menu, RS422
Refer to Figure 3-12A.
INTERFACE SELECT
INTERFACE MODE SELECT
DM STATE
RR STATE
3.3.5.2.2
Utility Interface, LVDS
Refer to Figure 3-12B.
INTERFACE MODE SELECT
3–42
Displays the current Interface Select, either DVB or 530.
Upon entry, the current status is displayed. Press [↑] or [↓] to change the selection. Press
[ENTER] to execute the change.
Displays the current Interface Mode Select, either SERIAL or PARALLEL in the DVB
Mode only.
Upon entry, the current status is displayed. Press [↑] or [↓] to change the selection. Press
[ENTER] to execute the change.
Displays the current DM STATE, either NORMAL or INVERT.
Upon entry, the current status is displayed. Press [↑] or [↓] to change the selection. Press
[ENTER] to execute the change.
Displays the current RR STATE, either NORMAL or INVERT.
Upon entry, the current status is displayed. Press [↑] or [↓] to change the selection. Press
[ENTER] to execute the change.
Displays the current Interface Mode Select, either SERIAL or PARALLEL.
Upon entry, the current status is displayed. Press [↑] or [↓] to change the selection.
Press [ENTER] to execute the change.
SDM-2020 Satellite Demodulator
Rev. 3
Advertisement
Table of Contents
