I-Miev Remote - Mitsubishi i-MiEV 2015 Owner's Handbook Manual

10
MITSUBISHI i-MiEV REMOTE
E ectively using your Mitsubishi i-MiEV Remote
1) Pre-activate the climate control – you can use the controller to set the climate inside the vehicle while the vehicle is plugged in. The
vehicle cabin's temperature will be comfortable while utilizing the power from the outlet rather than from the main drive lithium-ion
battery.
2) Timed battery charging – you can set a timer to take advantage of lower energy rates by having your Mitsubishi i-MiEV programmed
to charge during those o peak hours.
3) Battery level information – you can view your Mitsubishi i-MiEV's charge level on your i-MiEV Remote without being in your vehicle.
4) To maximize the range of the i-MiEV Remote, extend the antennae to its full height. When
unobstructed, the range is up to 300 feet.
Your Mitsubishi i-MiEV Remote includes the following functions:
1) Power/communication button – when briefly pushed, settings are communicated to the
Mitsubishi i-MiEV. When pushed longer than a second, the controller is turned on or o .
2) Mode button – scrolls to Charging Time, AC, Heater, and Defroster by just pressing the mode
button
3) Manual charge button – turns charging on or o , bypassing preset timers.
4) Scrolling buttons – scrolls the display items.
5) Communication signal – blinks when communicating with the vehicle and when errors occur.
6) Charging indicator – lights up during charging and blinks if charging cable is not connected
during charging attempt.
7) ERROR indicator – blinks if there is an operation or communication error.
8) Battery indicator – shows remaining charge of main drive lithium-ion battery. Blinks if battery
has less than 20% charge.
9) Timer indicator – shows whether the timer is on or o .
10) Program timing indicator – shows the amount of time left until timer charging is complete based on the program
time set.
11) Climate control settings – displays modes currently active.
5
7
9
10
4
6
1
8
2
11
3