Related Manuals for IEPC EPC9001C
Summary of Contents for IEPC EPC9001C
- Page 1 Development Board EPC9001C Quick Start Guide 40 V Half-Bridge with Gate Drive, Using EPC2015C...
-
Page 2: Quick Start Procedure
# Limited by time needed to ‘refresh’ high side bootstrap supply voltage. Quick Start Procedure Development board EPC9001C is easy to set up to evaluate the performance of the EPC2015C eGaN FET. Refer to Figure 2. for proper connect and measurement setup and follow the procedure below: 1. -
Page 3: Development Board
Adjust Driver – – (For E ciency External Circuit Measurement) Figure 1: Block Diagram of EPC9001C Development Board PWM Input EFFICIENT POWER CONVERSION Figure 2: Proper Connection and Measurement Setup EPC900 V DEVELOPMENT BOARD Rev. 5.0 eGaN® FET © EPC 2013... - Page 4 QUICK START GUIDE EPC9001C EPC – EFFICIENT POWER CONVERSION CORPORATION | WWW.EPC-CO.COM | COPYRIGHT 2015 | | PAGE 4...
-
Page 5: Visit Our Website
Demonstration Board Notification The EPC9001C boards are intended for product evaluation purposes only and is not intended for commercial use. As an evaluation tool, it is not designed for compliance with the European Union directive on electromagnetic compatibility or any other such directives or regulations. As board builds are at times subject to product availability, it is possible that boards may contain components or assembly materials that are not RoHS compliant.
Need help?
Do you have a question about the EPC9001C and is the answer not in the manual?
Questions and answers