Auto Reset; Auto Off - Savin 3355 Copy Reference Manual

Copying
Note
The maximum copy quantity can be set between 1 and 999 (default: 999).
See "Maximum Copy Quantity" in
To change the number entered, press the {Clear/Stop} key and enter the
new number.
G
Press the {Start} key.
2
The machine starts copying.
Note
When you set originals on the exposure glass, press the {#} key after all
originals are scanned.
Usually, when you set a single original on the exposure glass or in the doc-
ument feeder, the copied paper is delivered face up. However, with some
functions, copies will be delivered face down.
You can choose to have copies delivered either face up or face down (ex-
cept for copying through the bypass tray). See "Face-Up/Down Selection
in Platen Mode" in
To stop the machine during the multi-copy run, press the {Clear/Stop} key.
To return the machine to the initial condition after copying, press the {Clear
Modes/Energy Saver} key.

-Auto Reset

The machine returns to its initial condition automatically when your job is fin-
ished, after a certain period of time. This function is called "Auto Reset".
Note
You can change the Auto Reset time. See "Auto Reset Timer" in
"General Features

-Auto Off

The machine turns itself off automatically after your job is finished, after a cer-
tain period of time. This function is called "Auto Off".
Note
You can change the Auto Off time. See "Auto Off Timer" in the System Set-
tings manual.
30
P.329 "Input/Output".
1
/ ".
3
P.313 "General Features
2
/ ".
3
P.310