QSC TouchMix Series Quick Start Manual page 5

— Figure 15 —–
— Figure 16 —–
— Figure 18 —–
Pro Tools 12.5
NOTE: Pro Tools will need to create a Pro Tools Aggregate I/O Device in the
Audio MIDI Setup window of a setup app. This procedure will be covered later.
1. Open Pro Tools 12.5. You will be prompted to either create a new project or
open an existing one (Figure 15). Choose your approach.
2. To set up the Pro Tools Aggregate I/O, go to Setup > Hardware. In the
Hardware Setup window (Figure 16), click Launch Setup App.
3. The Setup MIDI Audio Devices window will open (Figure 17). Select Pro
Tools Aggregate I/O and select the QSC TM30 Pro. Set the sample rate to
match the mixer's sample rate (the TouchMix sample rate is configured in its
Rec/Play screen).
4. To set up I/O routing for the TouchMix-30 Pro, go in Pro Tools to Setup > I/O
Setup.
5. The I/O Setup window includes input and output assignment matrices
(Figure 18). Assign them as needed. Click OK.
6. To assign TouchMix-30 Pro inputs to tracks, go to Track > New... and click
Create.
7. The New Tracks window will open (Figure 19). In Create, enter the number
of tracks to add (for example, 32). Click Create; 32 mono audio tracks have
been added to Pro Tools.
— Figure 17 —–
5
macOS, Windows
— Figure 19 —–