Running The Network Test; Viewing Network Statistics; Using The 3Com Icon In The Windows System Tray; Enabling The Icon - 3Com EtherLink 10/100 PCI NIC Series User Manual

10/100 pci server network interface card with dynamicaccess technology
Table of Contents

Advertisement

54
C
7: R
HAPTER
UNNING
Running the Network
Test
Viewing Network
Statistics
Using the 3Com Icon
in the Windows
System Tray

Enabling the Icon

NIC D
W
IAGNOSTICS IN
INDOWS
Run the Network Test to check the NIC connectivity to the network.
1 On the Diagnostics screen, click Run Network Test.
The Network Connectivity Test screen appears.
2 Click Start.
If the test passes, the NIC connection to the network is functioning correctly.
If the test fails:
Make sure that the NIC is properly connected to the network cable.
Make sure that the hub or switch to which the NIC is connected is powered on.
Make sure that the cable complies with the proper length and rating specifications
for the network.
3 Click Close.
To view statistical information about the network:
1 Make sure that the NIC, the network driver, and the 3Com NIC Diagnostics
program are installed.
2 Open the Windows Start menu.
3 Select Programs, and then 3Com NIC Utilities.
4 Click 3Com NIC Doctor.
The 3Com NIC Diagnostics General screen appears.
5 Click the Statistics tab.
The Statistics screen appears.
The information is updated by the NIC driver every 5 seconds.
For a description of each statistic, click the question mark (?) in the upper right
corner of the screen, drag it over a statistic and click once. A pop-up box appears,
displaying information about the statistic.
6 Click OK to exit the diagnostics program. To go to another diagnostics screen, click
the associated tab.
The 3Com icon, which can be enabled to appear in the Windows system tray,
allows you to start the 3Com NIC Diagnostics program. It also allows you to
view the link speed of the NIC and number of frames sent and received.
To show the 3Com icon in the Windows system tray:
1 Make sure that the NIC, the network driver, and the 3Com NIC Diagnostics
program are installed.
2 Open the Windows Start menu.
3 Select Programs, and then 3Com NIC Utilities.

Advertisement

Table of Contents
loading

This manual is also suitable for:

3c980*-txm

Table of Contents