Nstalling And; Onfiguring In; Software Installation Requirements; Getting Help - 3Com EtherLink 10/100 PCI NIC Series User Manual

3
Software Installation
Requirements

Getting Help

Installing in
Windows NT
I

NSTALLING AND

W
INDOWS
Before you install software, you may want to verify that the installed server NICs
are functional or change their configuration settings by running DOS diagnostics.
Use the 3C90XCFG.EXE program located on the 3Com EtherLink Server CD.
If you are installing the software during the installation of the network operating
system, see Installing a 3Com NIC While Installing the NOS on page
For a list of installation requirements, see
The installation instructions assume you are using the Windows Auto Run
feature. If the Welcome screen does not come up automatically, you can perform
the installation by running begin.exe.
To display the Help system during the software installation, click Help on any
3Com window.
Before you begin software installation:
Make sure that all installation requirements are met. See
I
Requirements on page
Install the hardware. See
I
Use the following procedure to install the driver and diagnostics for the first time
in a computer that is running Windows NT. (If you are updating a previous
installation, see Updating Software in Windows on page
1 Boot the computer and start Windows NT.
2 Log in to the Windows NT Administrator account.
3 Insert the 3Com EtherLink Server CD in the CD-ROM drive.
4 From the Welcome screen, select NIC Software.
5 Click NIC Drivers and Diagnostics.
6 Follow the Wizard prompts.
7 Choose Typical or Custom Installation.
The Please Wait screen appears. After the installation is completed, an Update
dialog box appears.
C

ONFIGURING IN

Installation Requirements on page
7.
Installing and Connecting the NIC on page
57.
7.
Installation
9.
16.)