Advertisement
MOUNTING INSTRUCTIONS
3 Install Öhlins cartridge kit
otee!
1
The following procedure applies to both front
fork legs.
✋
Cautione!
The cartridge kit is divided into compression
and rebound cartridges.
Install compression cartridge marked "COMP"
in left hand side front fork leg.
Install rebound cartridge marked "REB" in right
hand side front fork leg.
1
Remove top cap, spring support and preload
tube.
2
Remove cylinder tube assembly from shaft
assembly.
3
Remove adaptor ring from cylinder tube
assembly.
4
Clean and degrease inner tube, fork bottom
and adaptor ring.
5
Install adaptor ring in fork bottom.
✋
Cautione!
Make sure to install the adaptor correctly. See
figure 5.
6
Install o-ring in fork bottom. Apply grease on
o-ring.
[00146-01 grease]
1
2
5
6
5
3
Advertisement
