Advertisement
MOUNTING INSTRUCTIONS
1 Remove original front fork
4
otee!
1
The following procedure applies to both front
fork legs.
1
Put the motorcycle on a workstand so that the
front wheel barely touches the ground.
⚠
arninge!
Make sure the vehicle is securely supported so
that it will not fall over.
2
Remove front fender, brake calipers, speed
sensor (if present) and front wheel.
3
Release main spring preload fully (if present).
4
Note front fork leg position.
5
Loosen upper triple clamp.
6
Loosen (do not remove) top cap ½ turn.
7
Loosen lower triple clamp.
8
Remove front fork legs from triple clamps.
3
Advertisement
