Blackridge BRG1700 User Manual page 12

Adding lubricating oil
Always use clean fresh oil as specified on page
9. Incorrect or old oil can cause the generator to
run rough and damage the motor; this will not be
covered by warranty.
1. Ensure that engine is OFF when filling oil.
2. Remove access panel, Pic. 1, item 5, page 10.
3. Use oil as detailed on page 9.
4. Ensure generator is level when filling with oil.
do NoT Tip.
5. Only fill oil to the top of the thread, Pic. 4.
6. Ensure that the oil filler cap is screwed on
tightly before attempting to start the generator.
WARNiNg: Over filling the oil can damage the
generator, this damage will not be covered under
warranty.
Multi Function Meter
pic. 5
This digital meter will show the following:
- Voltage
- Hertz
- Kilowatts
These will rotate every few seconds whilst the
generator is running. This display stops operating
once generator is stopped.
pic. 3
Access Panel
pic. 4
pic. 5
12
Oil plug and fill