Advertisement
Quick Links
1
Step 1.
Clean surface and peel the protective
backing from the Receiving Base.
3
Step 3.
Press firmly for several seconds to attach the
Receiving Base.
ASSEMBLY INSTRUCTIONS FOR
Lock & Locate
Boxes (#18671 & 18676)
™
Call Free 1.800.848.1633 • Fax Free 1.800.447.2923
Web: www.GoHCL.com • Email: hcl@GoHCL.com
2
Step 2.
Place the Receiving Base in the Wall Mount
or on countertop, cart top or shelves.
4
Step 4.
Loosely drive the screw into the desired
location on the wall or cabinet. (Screws are not
provided.)
© Health Care Logistics, Inc. 2011
Advertisement
Summary of Contents for Health Care Logistics Lock
- Page 1 Press firmly for several seconds to attach the Loosely drive the screw into the desired Receiving Base. location on the wall or cabinet. (Screws are not provided.) Call Free 1.800.848.1633 • Fax Free 1.800.447.2923 Web: www.GoHCL.com • Email: hcl@GoHCL.com © Health Care Logistics, Inc. 2011...
- Page 2 Pull up of the white button in the middle of the locking box. While pulling up on the button, pull the entire box forward off of the Receiving Base. Call Free 1.800.848.1633 • Fax Free 1.800.447.2923 Web: www.GoHCL.com • Email: hcl@GoHCL.com © Health Care Logistics, Inc. 2011...
-
Page 3: Programming - Introduction
FlexaCam adapters prior to making any changes. Remember to keep track of any Warning: Manual Lock - Single Use Timeout ON is a feature to prevent users default 1234) and press ENTER to lock or unlock the cabinet. Mounting hardware programming changes. - Page 4 KEDL Lock CompX RegulatoR is offered with Self Lock featuring SlamCAM. If your lock is the Self Lock version, follow the directions below to unlock and lock the CompX RegulatoR features several modes of operation. These functions can be KEDL is offered with Self Lock featuring SlamCAM. If your lock...
- Page 5 To change the supervisor code, follow the steps on page 8 to Timeout OFF enter programming mode. Warning: Manual Lock - Single Use Timeout ON is a feature to The factory default supervisor code is 12345 (supervisor codes prevent users from occupying a shared use locker or cabinet for a must be 4 to 8 digits in length.)
- Page 6 INSTRUCTIONS FOR KEDL Lock digit sis. attery RegulatoR, Keyless Locking 15 Call Free: 1.800.848.1633 • Fax Free: 1.800.447.2923 Web: GoHCL.com • Email: hcl@GoHCL.com © Health Care Logistics, Inc. 2014...