Health Care Logistics Lock-To-Pole IV Assembly Instructions

1
Clamp in the open position
Step 1.
Inspect the clamps for signs of wear and
tear. Open the door of the IV box and make sure
the two clamps are open. Note: The box will not
properly attach to the pole if the clamps are not in
the open position.
3
Step 3.
Hang the IV bag on the hook.
Health Care Logistics will not be liable if product is used outside of scope of the instructions.
ASSEMBLY INSTRUCTIONS FOR
Lock-To-Pole IV Lock Box with Key Lock (#19169)
Call Free: 1.800.848.1633 • Fax Free: 1.800.447.2923
GoHCL.com • hcl@GoHCL.com
2
Step 2.
Align the clamps on the inside of the box
with your pole. Holding the box with your four
fingers and the pole with your thumb, press firmly
until the clamps wrap around the pole. Once
installed, do not twist the box on the IV pole.
4
Step 4.
Lock the IV box door.
© Health Care Logistics , Inc. 2024
®