Technomate TM-RF HD IR User Manual page 4

Your display supports LCN (also check LCN is ON in your display), this will be the channel number you enter into your
displays remote to watch the TM-RF HD IR's channel.
If you would like to use a lower number, please check the first free slot in your EPG and that can be you LCN ID number.
a. Press MENU button
Go to ADVANCED via  buttons and press OK
b.
Go to LCN ID via  buttons and press OK
c.
Enter a number via  buttons
d.
e. Press OK to confirm
3. TSID: Default is: 128
a. Press MENU button
Go to ADVANCED via  buttons and press OK
b.
Go to TSID via  buttons and press OK
c.
Enter a number via  buttons
d.
e. Press OK to confirm
4. ONID: Auto will automatically configure ONID for all countries or select Manual to enter a number.
Default is: AUTO
a. Press MENU button
Go to ADVANCED via  buttons and press OK
b.
Go to ONID via  buttons and press OK
c.
Select a country or select Manual to enter a number via  buttons
d.
e. Press OK to confirm
5. Network ID: Auto will automatically configure Network ID for all countries or select Manual to enter a number
Default is: AUTO
a. Press MENU button
Go to ADVANCED via  buttons and press OK
b.
Go to NETWORK ID via  buttons and press OK
c.
Select a country or select Manual to enter a number via  buttons
d.
e. Press OK to confirm
6. Bandwidth: select 6, 7 or 8MHz. Default is: 8MHz
a. Press MENU button
Go to ADVANCED via  buttons and press OK
b.
Go to BANDWIDTH via  buttons and press OK
c.
Select bandwidth via  buttons
d.
e. Press OK to confirm
7. Constellation: select QPSK, 16QAM, or 64QAM. Default is 64QAM
a. Press MENU button
Go to ADVANCED via  buttons and press OK
b.
Go to CONSTELLATION via  buttons and press OK
c.
Select constellation via  buttons
d.
e. Press OK to confirm
8. FEC: select 1/2, 2/3, 3/4, 5/6, or 7/8. Default is: 7/8
a. Press MENU button
Go to ADVANCED via  buttons and Press OK
b.
Go to FEC via  buttons and press OK
c.
4