Summary of Contents for Technomate TM-RF HD IR
- Page 1 TM-RF HD IR User’s Manual Please note: the TM-RF HD IR supports 1080p Full HD & 4K UHD displays only...
-
Page 2: Important Safety Instructions
7. USB Service Port (for software update/download) 8. 12V DC Power Input 4. Menus Stream (please note that the TM-RF HD IR has been defaulted to UK settings): Country: select a country for your UHF settings. Default is UK. Press Menu button Go to STREAM via ... - Page 3 Edit letters via buttons Press OK to confirm Advanced (please note that the TM-RF HD IR has been defaulted to UK settings): LCN Mode: select a region or select Manual to enter a number. Default is: ITC Press MENU button Go to ADVANCED via ...
- Page 4 Your display supports LCN (also check LCN is ON in your display), this will be the channel number you enter into your displays remote to watch the TM-RF HD IR’s channel. If you would like to use a lower number, please check the first free slot in your EPG and that can be you LCN ID number.
- Page 5 Select a FEC via buttons Press OK to confirm Guard Interval: 1/4, 1/8, 1/16 or 1/32. Default is: 1/32 Press MENU button Go to ADVANCED via buttons and press OK Go to GUARD INTERVAL via buttons and press OK Select an interval via ...
- Page 6 TM-RF HD IR (default is 21), for a faster search. You can connect an existing aerial into the RF IN or in you have more than one TM-RF HD IR, you can cascade another TM-RF HD IR into it.
- Page 7 *All Splitters, Amplifiers and Adapters are available from Technomate, sold desperately. 7.b. To have more than 1 HDMI Source Device You can use up to 35 TM-RF HD IR’s in one system by cascading the modulators. This allows you to use up 35 HDMI source devices, allocated to different channels.
-
Page 8: Update & Configuration
If your TV supports LCN, the TM-RF HD IR will appear in your TV’s channel list as the channel number you selected. The default is 800 which means the TM-RF HD IR will appear as channel 800 in your EPG of your TV after all your TV / Radio channels. -
Page 9: Troubleshooting
Try a different Channel Number. Check that the channel number is not conflicting with your local transmitter, for example, in London BBC 1 is on channel 23 so if you selected Channel 23 in the TM-RF HD IR, it would not work. -
Page 10: Delay Time
10. DELAY TIME The TM-RF HD IR has a very fast delay time of less than 0.8 seconds, therefore channel change speeds will only take less than 0.8 seconds. For video only source devices such as CCTV products, this can be even faster. Please contact your supplier or Technomate for further information.