Technomate TM-RF HD IR User Manual page 3

2. Channel: enter a UHF channel number. Check which channels/frequencies are being used by your local television
stations to avoid conflict. It's best to select a channel that is unoccupied. For example, in the UK, Channel 21 is
unoccupied. Default is: 21
a. Press MENU button
Go to STREAM via  buttons and press OK
b.
Go to CHANNEL via  buttons and press OK
c.
Change numbers via  buttons
d.
e. Press OK to confirm
Please note which UHF channels are used for 4G/LTE transmissions (normally channels above 61) as a 4G/LTE filter may
be required to avoid interference (not included).
3. Service Name: enter a channel name which will appear in your TV's channel list. Default is: TV1
a. Press MENU button
Go to STREAM via  buttons and press OK
b.
3
Go to SERVICE NAME via buttons and press OK
c.
Edit letters via  buttons
d.
e. Press OK to confirm
4. Service ID: allocate an ID. Default is: 1.
a. Press MENU button
Go to STREAM via  buttons and press OK
b.
Go to SERVICE ID via  buttons and press OK
c.
Edit number via  buttons
d.
e. Press OK to confirm
5. Network Name: enter a network name which may appear in your TV's channel list.
a. Press MENU button
Go to STREAM via  buttons and press OK
b.
Got to NETWORK NAME via  buttons and press OK
c.
Edit letters via  buttons
d.
e. Press OK to confirm
6. Provider Name: enter a provider name which may appear in your TV's channel list.
a. Press MENU button
Go to STREAM via  buttons and press OK
b.
Go to PROVIDER NAME via  buttons and press OK
c.
Edit letters via  buttons
d.
e. Press OK to confirm
Advanced (please note that the TM-RF HD IR has been defaulted to UK settings):
1. LCN Mode: select a region or select Manual to enter a number. Default is: ITC
a. Press MENU button
Go to ADVANCED via  buttons and press OK
b.
Go to LCN MODE via  buttons and press OK
c.
Select a region or select Manual to enter a number via  buttons
d.
e. Press OK to confirm
2. LCN ID: enter a number. Default is: 800 which is an unused area of the EPG. Provided that
3