Advertisement
CHARGING OPERATION
CAUTION
The transceiver power MUST be turned OFF
during charging otherwise;
• The battery will not be charged correctly.
• The battery life may be shortened.
<For your information>
The transceiver's power may not be able to be
turned OFF when the battery is exhausted. In
such a case, remove the battery pack and
charge the battery pack only.
NEVER insert battery pack (with/without the
transceiver) in a wet or soiled condition into
the charger.
CHARGE INDICATOR
• Lights orange while charging.
• Lights green when rapid charging is completed.
- But it is still charging in trickle charge mode
when charging a Ni-Cd battery pack.
• Flashes orange when the protector is activated.
- Re-insert the battery pack (with/without the
transceiver).
• Flashes red when the protector is activated.
- The inserted battery pack or the charger
has some problem.
• Approx. charging period
BP-224 : 1 hours
BP-225 : 1.5 hours
BP-252 : 2 hours
* When the LED indicator does not light even after
a battery pack is inserted properly, the battery
pack may have some problem.
Transceiver
(with battery pack)
Battery pack
(BP-224, BP-225 or BP-252)
Eyelet: Use a rubber
band to secure the
transceiver, if desired.
AC adapter
BC-162
(Optional for
some versions)
CHARGER INSTALLATION
The BC-162 can be installed
• To a desktop
onto a desktop or wall as illus-
trated at right.
SUPPLIED ACCESSORIES
Item
• AC adapter (BC-145S)* ........................................................1
• Screws (3.5×30)....................................................................2
* Different type or no AC adapter is supplied with some versions.
• To a wall
Supplied screws
Supplied screws
Qty.
Advertisement
