Table of Contents
Advertisement
Selecting 1. SEQUENCE calls up a screen with the text SEQUENCE over two lines:
START and a 4-digit value, and FINISH and a 4-digit value. By alternating presses of
the
button (to view or change the value of each digit) with presses of the
button (to save settings and select the next digit in turn), you can designate the
number of the starting and ending memory locations to involve in batch data transfers
to a PC. When you are satisfied with the memory location settings, press the
button
to resume display of the main memory screen.
Selecting 2. BATCH STORE calls up another screen with the text BATCH OUT over
two options: BATCH 1. TO 12. and SELECT BATCH 1. Use the
or
button to
change the value on the lower line from the default value of 1 to any number from 1 to
12, representing the number of the batch to be transferred to a PC. Then press the
button. The unit will automatically resume display of the main memory screen.
8. Selecting 8. CALIBRATION calls up a screen with the text CALIBRATION over three
lines: CAL. RANGE, AVG. DATA and CAL. DATA.
-16-
Advertisement
Table of Contents
