Table of Contents
Advertisement
memory location setting, press the
button to resume display of the main memory
screen.
6. Selecting 6. MEMORY calls up a screen with the text OUTPUT over three options: 1.
SEQ. STORE; 2. BATCH STORE and 3. CLEAR MEMORY. Use the
or
button
to navigate to the desired option and then press the
button to select it.
Selecting 1. SEQ. STORE calls up another screen with the text SEQUENCE over two
options: 1. AUTO STORE and 2. CLOSE STORE. Use the
or
button to
highlight the desired method of storing measurements (automatic or manual). Then
press the
button to select it and resume display of the main memory screen.
Selecting 2. BATCH STORE calls up another screen with the text BATCH STORE over
two options: BATCH 1. TO 12. and SELECT BATCH 1. Use the
or
button to
change the value on the lower line from the default value of 1 to any number from 1 to
12. Then press the
button. The display will show the text PLEASE WAIT as the
EMHT40 assembles stored measurements into a batch with the assigned number. When
-14-
Advertisement
Table of Contents
