Dometic PERFECTPOWER DCC1224-10 Installation And Operating Manual page 15

PerfectCharge
I
NOTE
The individual values are found in chapter "Protective devices" on
page 27.
The battery charger can be adapted to different battery types via DIP switches.
When a TS-1 temperature sensor is connected, the charging converter adjusts the
charging voltage according to the measured temperature, see chapter "Technical
data" on page 24.
7.1 Connections and controls
Item in
fig. 1,
Description
page 3
1 Input terminals (+) of starter battery
2 Input terminals (–) of starter battery
3 Control cable (I1) for turning on the vehicle with on-board voltage (D+ or
terminal 15 (ignition))
4 LED display
5 Power regulation (I2) to limit the charging current to 5 A
6 RJ11 terminal: Connection of a temperature sensor (accessory)
7 Dip switch, see chapter "Adjust charging converter" on page 20
8 Output terminals (+) to the body battery
9 Output terminals (–) to the body battery
EN
Technical description
15