Audio Connections; Connecting Digital Audio Output To A Stereo Amplifier; Connecting Analog Audio Output To A Stereo Amplifier - Sanyo HT27744 Owner's Manual

Audio Connections

QuickTips
Position your TV at
■
least 2 feet from
stereo speakers.
The magnets in
the speakers may
affect the picture
quality.
Need help?
Visit our Web site at
www.sanyoctv.com
or Call 1-800-877-5032
What you will need for connections:
❶
Optical Digital Audio Cable – 1
REMOTE CONTROL
VCR TV CABLE
DVD SAT AUX
POWER POWER
INPUT INPUT RESET RESET
1 2 3
1 2 3
Connecting Audio Out Jacks to a Stereo Amplifier
Switch off TV and external equipment before connecting cables.
(Cables are not supplied.)
❶
Connect the TV Audio Out (R/L) to the Stereo Amplifier In (R/L).
❷
Press POWER to turn on the TV. Turn on external equipment also.
Notes:
DO NOT connect external speakers directly to the TV.
When TV Speakers is in the ON mode, sound will be
reproduced through your TV and stereo amplifier.
When TV Speakers is in the OFF mode, sound will be
reproduced only through the stereo amplifier. (See page 20
to set TV speakers.)
10
Connecting Digital or Analog Audio to Stereo Amplifier
Connecting Digital Audio Output to an External Amplifier
Using this optical digital connection minimizes electrical noise to help assure high quality signal transfer.
Switch off TV and external equipment before connecting cables. (Cables are not supplied.) Remove the protective
cover before connecting cable to TV digital optical jack.
CAUTION: DO NOT look directly at the laser light.
❶
Connect one end of the optical cable to the TV Digital Audio Output and the other end to the Stereo Amplifier
Optical Digital Input.
❷
Press POWER to turn on the TV. Turn on external equipment also.
Notes:
DO NOT connect external speakers directly to the TV.
When TV Speakers is in the ON mode, sound will be reproduced through your TV and stereo amplifier.
When TV Speakers is in the OFF mode, sound will be reproduced only through
the stereo amplifier. (See page 20 to set TV speakers.)
BACK OF TV
COMPONENT VIDEO INPUT
ANALOG
AUDIO
Y
OUTPUT
L P
b
R P
r
❷
COMPO 3 COMPO 2
❶
S-VIDEO
AUDIO 3
DIGITAL
VIDEO
UHF/VHF/CATV
ANTENNA IN
L
(MONO)
AUDIO
R
VIDEO 2 VIDEO 1
What you will need for connections:
❶
Audio Cable – 1
❶
STEREO AMPLIFIER
OPTICAL DIGITAL
HDMI CABLE
INPUT
DIGITAL
AUDIO
OUTPUT
SERVICE
❶
STEREO
AMPLIFIER
COMPONENT VIDEO INPUT
S-VIDEO
ANALOG
AUDIO AUDIO 3
Y
VIDEO
OUTPUT
L
L P
b
(MONO)
AUDIO
R
P R
r
COMPO 3 COMPO 2 VIDEO 2 VIDEO 1
BACK OF TV
HDMI
INPUT
DIGITAL
AUDIO
OUTPUT
DIGITAL
UHF/VHF/CATV
ANTENNA IN
SERVICE