Product Maintenance - Sanyo SC-150 Instruction Manual

PRODUCT MAINTENANCE

Caution: Be sure to turn the ON/OFF switch to the "
the power cord from the wall outlet before cleaning.
MAIN UNIT
1 Wet a soft cloth with neutral
detergent solution and wring
out excess liquid.
Caution: Do not use organic solvents, including thinner, or other strong cleaning liquids
such as alkaline detergents. Use of such substances may cause discoloration or
deterioration of materials resulting in deformation or cracking.
CLEANING THE AGITATOR ASSEMBLY
When threads get caught in the agitator assembly, clean the assembly. (SC-180 only )
Remove threads caught in the agitor assembly
by cutting them with scissors.
ELECTROSTATIC MICRON FILTER
The electrostatic micron filter should be replaced at least once every 8 months in order
to maintain cleaning performance. Only use genuine Sanyo replacement filters.
Remove the dust cover and replace
1
the electrostatic micron filter.
Electrostatic micron filter
Caution: The electrostatic micron filter cannot be reused.
9
2 Wipe the external surfaces
of the unit.
NE UT RA L
DE TE RG EN T
Threads
2
"position and disconnect
3 Wipe with a dry cloth.
Agitator assembly
Replace the dust cover.
Dust cover